How to Debrick TP-Link WA701ND V2

This article, i'll show you how to Debrick WA701ND V2. If your router bricked after flashing custom firmware, you must read this article.

Tools

• USB to TTL
• Header Single
• Jumper Female to Female

Software

• PuTTY
• TFTPD
• Original 701ND V2 firmware with No Boot [ Download ]

 DO WITH YOUR OWN RISK 

First, solder header to 701ND board (you can search where you must solder your Jumper). Plug-in jumper to header and USB to TTL.

After that, open putty, and open serial console to your usb to ttl and use speed 115200. And now switch on your 701ND.

see at Putty, and type tpl untill you see hornet> .

Now see this command.

setenv ipaddr ipaddressrouter

setenv serverip ipaddresspc

tftpboot 0x80000000 sys.bin

erase 0x9f020000 +0x332004

cp.b 0x80000000 0x9f020000 0x332004

Note:

• ipaddressrouter is your router's ip address
• ipaddresspc is your computer's ip address
• sys.bin is the name of your firmware that put on TFTPD folder

I hope you can Debrick your router. I's easy if you want!

Kholis,

www.sekolahmikrotik.com